1.800.387.7115

1.877.432.3627

Home >> Shaft Seals >> Hydraulic Seals >> Piston Seals
 

Piston Seals

Two-part seal requiring no lubrication. Provides bi-directional sealing.Easy installation and removal, and can be cut in the field for easier installation.
 

 


Daemar DMR Hydraulic Seals Piston Seals

Style PS1400

The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with rubber energizer, assures positive contact with the dynamic surface.

Daemar DMR Hydraulic Seals Piston Seals

Style PS1500

Totally interchangeable with Style PS1400 PTFE piston seals, Style PS1500 piston seals are molded from tough 60 shore D durometer polyurethane. During the molding process, a .002” thick band of molybdenum is molded into the outside diameter of the seal ring for reduced friction.

Daemar DMR Hydraulic Seals Piston Seals

Style PS1600

15% Glass Filled PTFE seal rubber energizer.

Daemar DMR Hydraulic Seals Piston Seals

Style PS1800

The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93- 32-1973.

 

Daemar DMR Hydraulic Seals Piston Seals

Style PSQ

These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible.

Daemar DMR Hydraulic Seals Piston Seals

Style PS914

Glass Filled Nylon Seal Rubber Energizer.

 

Daemar DMR Hydraulic Seals Piston Seals

Style PSC

The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number).
The crowned sealing surface produces a positive seal from vacuum to high pressure.

Daemar DMR Hydraulic Seals Piston Seals

Style PSM

Molded from 93 Shore A polyurethane with a 70 Shore A energizer, this seal utilizes the same groove dimensions as a standard o-ring to T-seal. Extrusion resistant by design, this seal also is resistant to rolling and twisting.

 

Daemar DMR Hydraulic Seals Piston Seals

Style PSU

Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore.

Daemar DMR Hydraulic Seals Piston Seals

Style CPS

A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.

 

Daemar DMR Hydraulic Seals Piston Seals

Style SPR

When using iron piston rings, it is crucial to use the correct groove design for proper performance of the cylinder.

Daemar DMR Hydraulic Seals Piston Seals

Style MPS Metric

PTFE Piston Seal Nitrile 70 Energizer. 2 pc Piston seal.

 

Daemar DMR Hydraulic Seals Piston Seals

Style MCPS Metric

PTFE Piston Seal Nylon Back-up Buna-n Energizer. 4 Pc Piston Seal.pins.

 

 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

Daemar Oakville is ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.