Constant Section Rings

Daemar’s uniform section rings are often interchangeable with stamped rings. They will function in a housing or on a shaft as well as or better than their stamped ring replacements. Interchangeability is offered in both our internal and external series rings. Contact a Daemar representative for assistance in identify the correct replacement part for your application.

EN Series – External

EN series external notched rings for shaft applications. For shaft diameters ranging from 2-1/16″to 5″

Size Range: 2.063 – 5 inches

XAN Series External

XAN series external retaining rings for shaft applications. For shaft diameters or bearing bores ranging from 5/16″ to 10″

Size Range: .313 – 10 inches

SAE Standard Bearings – External

External retaining rings shaft application for SAE standard bearings (Metric Sizes). For shaft diameters or bearing bores ranging from 12mm to 110mm

Size Range: 12mm – 110mm

Ball & Roller Bearings – External

External retaining rings for grooves in outer tracks of ball or roller bearings. For bearing O.D. ranging from 22mm to 240mm

Size Range: 22mm – 240mm

XD Series – External

XD series external retaining rings (light duty) shaft applications for needle bearings. For shaft diameters or bearing bores ranging from .500″ to 8″

Size Range: .500 – 8 inches

Round Section – External

Round section external retaining rings for shaft applications. For shaft diameters ranging from .250″ to 1.750″

Size Range: .250 – 1.750 inches

Square Section – External

Square section external retaining rings for shaft applications. For shaft diameters ranging from .250″ to 1.750″

Size Range: .250 – 1.750 inches

IN Series – Internal

IN series internal notched rings for housing applications. For housing diameters ranging from 1.750″ to 10″

Size Range: 1.750 – 10 inches

NAN Series – Internal

NAN series internal retaining rings for housing applications. For housing diameters ranging from .375″ to 10″

Size Range: .375 – 10 inches

SAE Standard Bearings – Internal

Internal retaining rings housing applications for SAE standard bearings (Metric Sizes). For housing diameters or bearing O.D. ranging from 29.93mm to 200mm

Size Range: 29.93mm – 200mm

ND Series – Internal

ND series internal retaining rings housing applications for needle bearings. For housing diameters or bearing O.D. ranging from 1.125″ to 8″

Size Range: 1.125 – 8 inches