Since 1973
Catalog
After Hours Service
Contact Us
button-CAN-50.png
1.800.387.7115
button-USA-25.png
1.877.432.3627

Home >> Seal >> Trelleborg Sealing Solution >> Static Seals

Static Seals

Rubber, PTFE, Metal, Bonded and Inflatable

In a static sealing applications there is no movement between sealing surfaces or between the seal surface and its mating surface.

The most common seal used in static sealing situations is the O-Ring, but in addition to these, Trelleborg Sealing Solutions offers a range of specialized static seals.

Download Trelleborg’s Airseal Catalogue.
Download Trelleborg’s O-Rings and Back-up Rings Catalogue.
Download Trelleborg’s Quad – Ring Catalogue.
Download Trelleborg’s Kantseal Catalogue.
Download Trelleborg’s Wills Ring Catalogue.

 

 


Airseal | Static Seals | Trelleborg

Airseals are tubular elastomer seals activated by internal pressurization (inflatable seals) with air, water or other media. Airseals are used wherever reliable sealing of accesses to plants, containers and rooms are required. They represent a technically improved alternative to the standard contact pressure seals and can be easily adapted to match the surface to be sealed.
Features: DoubleActing and Static
Ø – Range Pressure Range Temp. range Velocity
50 – 4,000 mm 1 MPa -50°C +220°C
2 -157 in 145 psi -55°F +430°F

Back-up Ring | Static Seals | Trelleborg

Back-up Rings are installed together with O-Rings and Quad-Ring® Seals / X-Rings to prevent gap extrusion in applications above 5 MPa / 725 psi. Available in spiral, cut or uncut designs in filled or unfilled PTFE, Turcon®, elastomers and thermoplastics based on ISO 3601, AS 568.

Features: Reciprocating and Static

Ø – Range Pressure Range Temp. range Velocity
from 2.9 mm 250 MPa -200°C +260°C 0.5 m/s
from 0.115 in 36,250 psi -325°F +500°F 1.6 ft/s

Back-up Ring concave | Static Seals | Trelleborg

Back-up Rings are installed together with O-Rings and Quad-Ring® Seals to prevent gap extrusion in applications above 5 MPa / 725 psi. Available in spiral, cut or uncut designs in filled or unfilled PTFE, Turcon®, elastomers and thermoplastics based on ISO 3601, AS 568.

Features: Reciprocating and Static

Ø – Range Pressure Range Temp. range Velocity
from 2.9 mm 250 MPa -200°C +260°C 0.5 m/s
from 0.115 in 36,250 psi -325°F +500°F 1.6 ft/s

Bonded Seals | Static Seals | Trelleborg

These are sealing discs that seal threads and flange joints. The discs consist of a metallic ring and a rubber sealing pad bonded together. Available in metric and inch dimensions.

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
M2.5 – M125 mm 100 MPa -30°C +200°C
1/8 – 2 1/2 in 14500 psi -20°F +390°F

Elastomeric Dualseal | Static Seal | Trelleborg Sealing Solutions

Developed to address fluid power industry requirements, the Elastomeric Dualseal is a one-piece alternative to O-Rings and Back-up Rings for static sealing. As a single component, it can easily retrofit existing standard ISO 3601-1/AS 568 O-Ring groove sizes and provides improved performance in most applications.

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
2 – 658 mm 0 – 21 MPa -30°C +100°C
0.070 – 26 in 0 – 3,000 psi -22°F +212°F

Zurcon® SAE Flange Seal | Static Seals | Rubber Seals | Trelleborg

SAE Flange Seals provide high functional security and can easily be mounted and dismounted. They are used in a variety of applications including hydraulics, press manufacturing and materials-handling. SAE Flange Seals corresponding to SAE J 518 are available in three different variants: O-Rings, Rectangle Seals and Zurcon®Flange Seals DRV5.

Features: SingleActing and Static

Ø – Range Pressure Range Temp. range Velocity
15 – 50 mm 42 MPa -35°C +110°C
0.59 – 2 in 6000 psi -30°F +230°F

Kantseal | Static Seals | Trelleborg

Kantseal is an elastomer square sectioned ring for static applications. Mostly used on flanges to SAE standards and covers, it has a high sealing efficiency and keeps its shape. Available in nitrile (NBR) and fluorocarbon (FKM).

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
5 – 456 mm 50 MPa -30°C +200°C
0.197 – 18 in 7250 psi -20°F +390°F

Metal End Cap (MEC) Seal | Static Seal | Trelleborg Sealing Solutions

Elastomer chemically bonded onto 2 steel caps. This provides high level of extrusion resistance.

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
50 – 600 mm 100 MPa -20°C +177°C
1.969-23.62 in 15000 psi -4°F +350°F

Quad-Ring® Seals/X-Ring | Static Seals | Trelleborg

A double-acting four lip seal for static and dynamic applications. Available in a wide range of elastomer compounds. Provides higher seal efficiency and lower friction than conventional O-Rings.® Trade Mark of Quadion Corporation.

Features: DoubleActing, Helix, Oscillating, Reciprocating, Rotary and Static

Ø – Range Pressure Range Temp. range Velocity
1 – 660 mm 40 MPa -30°C +200°C 0.5 m/s (up to 2 m/s rotary) m/s
0.039-26 in 5800 psi -20°F +390°F 1.6 ft/s (up to 6.5 ft/s rotary) ft/s

Turcon® Variseal® H | Static Seals | Trelleborg

A single-acting face sealing element comprised of a U-shaped Turcon® ring and a coiled metallic energizing spring. The seal has a high specific sealing force and gives gas-tight sealing even at low temperatures. Resistant to most liquids and chemicals it has unlimited shelf life. Used for inside or outside sealing, the seal is available in versions for cryogenic service.

Features: Helix, Reciprocating, Rotary, SingleActing and Static

Ø – Range Pressure Range Temp. range Velocity
3 – 3,300 mm 40 MPa -100°C +200°C
0.118 – 130 in 5800 psi -150°F +390°F

Turcon® Variseal® HF | Static Seals | Trelleborg

A single-acting sealing element comprised of a U-shaped Turcon® ring and a coiled metallic energizing spring. The seal has a high specific sealing force and gives gas-tight sealing even at low temperatures. Resistant to most liquids and chemicals it has unlimited shelf life. Used for radial static or slightly dynamic applications, the seal is available in versions for cryogenic service.

Features: SingleActing and Static

Ø – Range Pressure Range Temp. range Velocity
3 – 3,300 mm 60 MPa -150°C +200°C
0.118 – 130 in 8700 psi -240°F +390°F

Wills Rings® C | Static Seals | Trelleborg

Wills Rings®C are metal C-Rings used for almost any static face sealing applications. They give reliable performance over a large temperature range in liquids and can also seal high pressures and vacuums. Wills Rings®C exhibits greater spring back and elasticity than Wills Rings®O. This characteristic provides more effective sealing where thermal expansion of the seal housing is found.

Features: SingleActing and Static

Ø – Range Pressure Range Temp. range Velocity
20 – 500 mm 200 MPa up to +750°C
0.787-19.5 in 29000 psi up to +1,380°F

Wills Rings® O | Static Seals | Trelleborg

Wills Rings®O are metal O-Rings for static face-sealing applications that give reliable performance over a large temperature range for gases and liquids. Extreme high pressures and vacuums can be sealed with Wills Rings®O giving long life and excellent corrosion resistance. Available as pressure-filled, pressure-actuated, non-pressurized and solid seals, in mild and stainless steel, copper and Inconel®600 materials.

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
8 – 3,000 mm 1000 MPa up to +850°C
0.315 – 118 in 145000 psi up to +1,560°F

XploR™ FS-Seal | Static Seals | Trelleborg Sealing Solutions

Profiled elastomer seal with 2 integral anti-extrusion springs.  Designed to take up large tolerances on mating hardware.

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
50 – 600 mm 103.4 MPa -20°C +200°C
1.969-23.62 in 15000 psi -4°F +392°F

XploR™ S-Seal | Static Seals | Trelleborg Sealing Solutions

Profiled elastomer seal with 2 intergral anti-extrusion springs.

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
50 – 600 mm 103.4 MPa -20°C +200°C
1.969-23.62 in 15000 psi -4°F +392°F

Zurcon® Dualseal | Static Seals | Trelleborg

Zurcon® Dualseal is a sealing element for static applications and a highly effective alternative to an O-ring and Back-up Ring combination. The main advantages are resistance to twisting, stability at pulsating pressures and low contamination risk. Zurcon®Dualseal is easy to install and guarantees long service life. Recommended for heavy duty applications in cylinders and valves.

Features: DoubleActing and Static

Ø – Range Pressure Range Temp. range Velocity
6 – 280 mm 50 MPa -35°C +110°C
0.236 – 11 in 7250 psi -30°F +230°F

 

shaft-seal-150

SEAL

dmr-wave-springs-multiturn-single

RETAIN

caplug-500

PROTECT

dryslide-150-2

SLIDE

DMR_SlottedShim_A-075-150x150

ALIGN

Translate »
Scroll to Top