Since 1973
Catalog
After Hours Service
Contact Us
button-CAN-50.png
1.800.387.7115
button-USA-25.png
1.877.432.3627

Minuteman Self Lubricating Bearings

Home » Minuteman Self Lubricating Bearings

Home >> Slide >> Linear Motion Bearings >> Minuteman Self Lubricating Bearings

 LM76 Self Lubricating Bearings

Minuteman Self Lubricating Bearings

The LM76 Minuteman Self Lubricating Linear bearings, pillow blocks and flange blocks are direct drop-in replacements for linear ball bearings. Minuteman bearings are self lubricating and because the PTFE Composite has no abrasive fillers, it can run on RC60, soft 300 series stainless and aluminum.


dmr-lm76-open-and-closed-bearings-minute-man-green
Open and Closed Bearings

Nominal bearing sizes ranging from 1/4″ up to 4″. Open and closed styles with self aligning feature available (SA).

 

dmr-lm76-minuteman-inch-closed-single-pillow-block
Inch Closed/Single Pillow Blocks

Nominal bearing sizes ranging from 1/4″ up to 4″. Open and closed styles with self aligning feature available (SA).

 

dmr-lm76-inch-open-single-pillow-blocks
Inch Open/Single Pillow Blocks

Nominal bearing sizes ranging from 1/4″ up to 4″. Open and closed styles with self aligning feature available (SA).

 

dmr-lm76-inch-closed-twin-pillow-blocks
Inch Closed/Twin Pillow Blocks

Nominal bearing sizes ranging from 1/4″ up to 4″. Open and closed styles with self aligning feature available (SA).

 

 

dmr-lm76-inch-open-twin-pillow-blocks
Inch Open/Twin Pillow Blocks

Nominal bearing sizes ranging from 1/4″ up to 4″. Open and closed styles with self aligning feature available (SA).

 

dmr-lm76-flange-blocks
Flange Blocks

Nominal bearing sizes ranging from 3/8″ up to 1-1/4″. Self aligning feature available (SA).

 

dmr-lm76-minuteman-self-lube-twm-bearing
Self Lube TWM Bearings

Nominal metric bearing sizes ranging from 6mm up to 50mm. Also available with a white ptfe FDA/USGA compliant liner and a ceramic coated shell.

 

dmr-lm76-minuteman-alm
ALI & ALM SERIES

ALI (Inch) and ALM (Metric) linear/rotary, self lubricating bearings offer a thin wall T6061 aluminum shell with a bonded Self Lubricating PTFE liner. Nominal inch sizes from 1/4″ up to 3″ and nominal metric sizes ranging from 8mm up to 20mm.

 

 

shaft-seal-150

SEAL

dmr-wave-springs-multiturn-single

RETAIN

caplug-500

PROTECT

dryslide-150-2

SLIDE

DMR_SlottedShim_A-075-150x150

ALIGN

Translate »
Scroll to Top