Home >> Slide >> Dryslide Bushings
Dryslide Bushings
The Dryslide Bushings trademark identifies a whole range of self-lubricated dry sliding bushings and bearings. TH Series bushings have a composite structure consisting of a carbon steel backing, an intermediate layer of sintered bronze and a PTFE based sliding lining. The THX Series bushings have a composite structure consisting of a carbon steel backing onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic.
![TH Series Bushings Daemar DMR TH Dryslide Bushings](https://daemar.com/wp-content/uploads/2013/05/DMR_16TH16-03_500.jpg)
TH Bushings
TH Series bushings have a composite structure consisting of a carbon steel backing, an intermediate layer of sintered bronze and a PTFE based sliding lining. Available in inch and metric sizes.
![THX Series Bushings Daemar Dryslide Bushings](https://daemar.com/wp-content/uploads/2014/02/dmr-slide-bushing-thx-01.jpg)
THX Bushings
The THX Series bushings have a composite structure consisting of a carbon steel backing onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface. Available in inch sizes.
![dmr-fth-series-bushings-flanged-design](https://daemar.com/wp-content/uploads/2014/02/dmr-fth-series-bushings-bearings-render-profile.jpg)
FTH Bushings
FTH Series bushing is a flanged style dryslide bushing. The FTH is a composite structure consisting of a carbon steel backing, an intermediate layer of sintered bronze and a PTFE based sliding lining. Available in inch and metric sizes.
![dmr-thrust-bushings-ts-flat-strips](https://daemar.com/wp-content/uploads/2013/05/dmr-thrust-bushings-ts-flat-strips.jpg)
TS Flat Strips
TS Flat strips series has a composite structure consisting of a carbon steel backing, an intermediate layer of sintered bronze and a PTFE based sliding lining. Available in inch and metric sizes.
![dmr-thrust-bushings-tw-washer](https://daemar.com/wp-content/uploads/2013/05/dmr-thrust-bushings-tw-washer.jpg)
TW Flat Washers
TW Series has a composite structure consisting of a carbon steel backing, an intermediate layer of sintered bronze and a PTFE based sliding lining. Available in inch and metric sizes.