Daemar Inc – Des composants essentiels pour l'industrie
Fondée depuis 1973
Catalogue
Service à la clientèle continu
Contactez-nous
button-CAN-50.png
1.800.387.7115
button-USA-25.png
1.877.432.3627

Retaining Rings Metric Axially Assembled

Home » Retaining Rings Metric Axially Assembled

Home >> Retaining Rings >> Metric Retaining Rings >> Metric Axially Assembled

Daemar Metric Axially Assembled Retaining Rings

 

Metric Axially Assembled

Metric axial retaining rings are designed for axial installation into machined grooves. These rings are either internal for installation in housings and bores, or external, for assembly on shafts. Once installed, they provide a protrusion or “shoulder” for retaining parts.

 


 

DHO Retaining Rings Metric Axially Assembled Internal D1300 DIN-472

DHO – Internal Housing Ring

Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a “shoulder”) holds an assembly in place.

Size Range: 8mm – 400mm

DSH Retaining Rings Metric Axially Assembled External

DSH – External Shaft Ring

Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a “shoulder”) holds an assembly in place.

Size Range: 3mm – 400mm

DHI Retaining Rings Metric Axially Assembled Internal

DHI – Internal Housing Inverted Ring

Functions like an HO ring in a housing/bore, only the lugs are “reversed.” This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.

Size Range: 12mm – 100mm

DSI Retaining Rings Metric Axially Assembled External

DSI – External Shaft Inverted Ring

Functions like an SH ring on a shaft, only the lugs are “reversed.” This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.

Size Range: 12mm – 100mm

DHR Retaining Rings Metric Axially Assembled Internal Heavy Duty

DHR – Internal Housing Reinforced Ring

A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a “shoulder”) holds an assembly in place.counterpart.

Size Range: 20mm – 100mm

DSR Retaining Rings Metric Axially Assembled External Heavy Duty

DSR – External Shaft Reinforced Ring

The DSR is an extra thick version of a regular DSH retaining ring. As such, it is stronger and can withstand greater thrust loads than its standard counterpart.

Size Range: 12mm – 100mm

DHT Retaining Rings Metric Axially Assembled

DHT – Internal Housing Teeth Ring

Similar in design to the DHO internal ring, this features several “teeth” equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.

Size Range: 16mm – 170mm

DST Retaining Rings Metric Axially Assembled

DST – External Shaft Teeth Ring

Similar in design to the DSH external ring, this features several “teeth” equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.

Size Range: 16mm – 140mm

 

 

shaft-seal-150

ÉTANCHÉITÉ

RÉTENTION

PROTECTION

ROULEMENT

DMR_SlottedShim_A-075-150x150

ALIGNEMENT

Translate »
Scroll to Top