Since 1973
Catalog
After Hours Service
Contact Us
button-CAN-50.png
1.800.387.7115
button-USA-25.png
1.877.432.3627

Shim Rolls & Sheets

Home » Shim Rolls & Sheets

Home >> Align >> Shim Rolls
 

Shim Rolls

Shim Stock Rolls features a roll of shim conveniently packaged in an easy opening box. Simple to store and transport the boxes are well labeled for quick and easy part identification.

  • Precision rolled to assure accuracy in all its applications.
  • Shim Stock is available for 0.0005” to 0.032” thick.
  • Standard widths are 6” or 12”

Shim stock can be easily stamped, bored, cut, milled, sheared or drilled to suit any application. Contact us for your custom sizes.

 

daemar-shim-rolls-stainless-steel
Stainless Steel Shim Rolls
DMR Stainless Steel is 300 Series, full hard tempered
Full-hard Stainless Steel is slightly magnetic due to cold rolling. Stainless Steel Shim Stock has a Rockwell hardness of C40-45
daemar-shim-rolls-brass
Brass Shim Rolls
It has been cold rolled to a 1/2 hard temper with a tensile strength of appox. 62,000 PSI. Brass Shim Stock is 70% Copper & 30% Zinc. It has a Rockwell hardness of 30T 56/68.
daemar-shim-rolls-steel
Steel Shim Rolls
DMR Steel Shim is low carbon mild steel cold rolled to a #1 hard temper.  It is stiff and springy, and can be used where hardness is required.
daemar-shim-rolls-nickel
Nickel Shim Rolls
DMR Nickel Shim Stock is a 200 grade annealed material.

 

 

daemar-shim-rolls-aluminum
Aluminum Shim Rolls
DMR Aluminum Shim Stock is a type 1100, which has a minimum aluminum content of 99%. Its temper is H-18, full hard.
daemar-shim-rolls-blue-tempered
Blue Tempered  Shim Rolls
DMR Blue Tempered Shim Stock is 1095 high carbonspring steel. It has a Rockwell hardness of C 48/51.Blue Tempered Spring Steel is polished and blued.
daemar-shim-rolls-annealed-steel
Annealed Steel Shim Rolls
DMR Annealed Steel is 1075 high-Carbon steel, which is heat treatable. Annealed Steel is a spheroidized annealed temper.
daemar-shim-rolls-cooper
Copper Shim Rolls
DMR Copper Shim Stock is a 110 alloy material in the annealed (soft) condition.

 


 

Plastic Shim Sheets

DMR Plastic Shim Stock is colour coded for your convenience. It is used where corrosion is a problem. The size of the pieces are 5″x20″, 10″x20″, 20″x20″. From .0005″ to .030″ thick. Special slit widths are available on request.

 

DMR_Plastic_Shim
Plastic Shim Sheets
DMR Plastic Shim Stock is colour coded for your convenience. It is used where corrosion is a problem.
DMR_Plastic_Shim
Plastic Shim – Assortment Packs
DMR Plastic Shim packs  is colour coded for your convenience. It is used where corrosion is a problem.

 

 

shaft-seal-150

SEAL

dmr-wave-springs-multiturn-single

RETAIN

caplug-500

PROTECT

dryslide-150-2

SLIDE

DMR_SlottedShim_A-075-150x150

ALIGN

Translate »
Scroll to Top