Since 1973
Catalog
After Hours Service
Contact Us
button-CAN-50.png
1.800.387.7115
button-USA-25.png
1.877.432.3627

Home >> Retaining Rings >> Installation Tools

Daemar Installation Tools Retaining Rings

 

Installation Tools

Rotor Clip pliers, applicators, dispensers and automatic assembly tools specifically designed for aiding in the installation of Rotor Clip retaining rings.

 


 

Standard Pliers

Standard Pliers

Rotor Clip pliers, applicators, dispensers and automatic assembly tools specifcally designed for aiding in the installation of Rotor Clip retaining rings.

Find Correct Plier Size

Daemar-DMR-Retaining-Ring-ratchet-pliers

Ratchet Pliers

Assemble large retaining rings up to 10” in diameter with ease and comfort using Ratchet Pliers. Spring loaded mechanisms compress or expand large rings through gradual “steps.” Plier locks at the desired size without continued pressure on the handles.

Find Correct Plier Size

dmr-retaining-ring-convertible-pliers

Convertible Pliers

Convert quickly and easily from internal to external pliers and back again.This two-in-one capability is cost effective and ideal for handling a variety of applications with a minimum number of tools. Simply move the screw to the other hole and tighten with finger pressure to convert quickly to an internal/external plier.

Find Correct Plier Size

Daemar-DMR-Retaining-Ring-heavy-duty-pliers

Heavy-Duty Pliers

Heavy-Duty Retaining Ring Pliers are designed to perform with excessive use – up to 10 times longer than standard retaining ring pliers. The pliers are made of forged Chrome Vanadium steel, and the handles have a non-slip plastic coating.

Find Correct Plier Size

dmr-retaining-ring-dispencers

Dispensers

Retaining ring dispensers feature “rail” over which a stack of retaining rings can be slipped. Once in position, they can be “dispensed” one at a time using a retaining ring applicator for ease of installation.

Find Correct Dispenser Size

dmr-retaining-ring-applicators-01

Applicators

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)

Find Correct Applicator Size

 

 

shaft-seal-150

SEAL

dmr-wave-springs-multiturn-single

RETAIN

caplug-500

PROTECT

dryslide-150-2

SLIDE

DMR_SlottedShim_A-075-150x150

ALIGN

Translate »
Scroll to Top