Since 1973
Catalog
After Hours Service
Contact Us
button-CAN-50.png
1.800.387.7115
button-USA-25.png
1.877.432.3627

Home >> Align >> Keystock

Keystock

Daemar’s Keystock are removable bars that are used to transmit torque from components including couplings, sheaves, sprockets and gears to a shaft.

They are called “keys” because they lock a component to the shaft by means of a corresponding keyway in a shaft.

Keystock is available in both inch and metric sizes. Common keystock materials include steel, stainless steel and plated with zinc and are supplied in standard lengths of 12” & 36″ lengths.

Technical Resources

 

daemar-key-stock-zinc-plated

Square Keystock-Zinc

Ranges from 1/16″ square to 2-1/2″ square. 12″ and 36″ available. The material is 1018 carbon steel, Zinc plated.

daemar-key-stock-unplated

Square Keystock-Unplated

Ranges from 1/16″ square to 2-1/2″ square. 12″ and 36″ available. The material is 1018 carbon steel, plain finish (un-plated).

daemar-key-stock-stainless-steel

Square Keystock-Stainless

Ranges from 1/16″ square to 2-1/2″ square. 12″ and 36″ available. The material is 303 stainless steel, 316 can be provided up request.

daemar-key-stock-brass

Square Keystock-Brass

Ranges from 1/16″ square to 2-1/2″ square.  12″ and 36″ available. The material is brass.

 

daemar-key-stock-stainless-steel

Rectangular Keystock

Ranges from 1/8″ x 3/16″ up to 2″ x 2-1/2″.  The material is 1018 carbon steel and is available with either zinc plated or plain finish, stainless and brass can be provided.Available in 12″ and 36″ lengths.

daemar-key-stock-unplated

Metric Keystock

Made of high quality zinc plated cold drawn steel.  Bars are cut, not sheared.  Over tolerances: -.000mm to +.0762mm.  Sold in 12 inch and 1 meter lengths

daemar-key-stock-step-key-sk-type-2

Stepped Keystock

Step keystock is used on couplings, gears, sheaves, sprockets, and pulleys. Type 1 is designed for repair and salvage of damaged shafts. Type 2 is useful when mating mismarked keyways, gears, and shafts.

daemar-key-stock-zinc-plated

Undersize Tolerance Barstock

Undersize keystock is used where close or undersize tolerances are required. Ranges from 1/8″ square to 2″ square and also available in rectangular sizes.  The material is 1018 carbon steel and is available with either zinc plated or plain finish. Also available in 303 stainless steel.

 

daemar-key-stock-unplated

Machinery Keys

Machinery keys are stocked with both ends square and manufactured from 1018 carbon steel.

daemar-wood-ruff-keys-wk-15

Woodruff Keys

Machined from 1035 steel, DMR Woodruff Keys (Half Moon Keys) are available from stock in 50 SAE size.  Special sizes and materials suh as alloy steel (A-3630) are available on special order from the factory.

DMR_GibHeadKey-01_500

Gib Head Keys

Used for holding pulleys and gears tightly on the shaft.  They are tapered 1/8″ per foot to fit snugly on the shaft are machined from 1018 steel.

DMR_SP_KIT_2_image

Spring Pin Kits

2 sizes of spring pin assortment kits, the DMR SP1 kit contains 10 each of 12 sizes ranging in diameters from 1/16″ to 1/8″ and lengths from 1/4″ up to 1-1/2″. The DMR SP2 kit contains 10 each of 12 sizes ranging in diameters from 5/32″ to 3/8″ and lengths from 1″ up to 1-3/4″.

Keystock Kits 

Square Keystock kits available in imperial and metric sizes. Material: Steel, Stainless and Brass.

 

 

 

 

 

shaft-seal-150

SEAL

dmr-wave-springs-multiturn-single

RETAIN

caplug-500

PROTECT

dryslide-150-2

SLIDE

DMR_SlottedShim_A-075-150x150

ALIGN

Translate »
Scroll to Top